The original post: /r/diy by /u/DoorM4n on 2024-10-04 01:16:30.
Do y’all have any suggestions or revisions?
Thanks!
Ground wire - Currently, long and daisy chained from a greenie. I will uncap the greenie, wire the fan timer ground under the greenie and retighten greenie. Then I’ll use the ground from the greenie to install into the light switch. (Is there a better way to do this? I figured this would be easiest.)
Load wires - pretty straightforward here. Connect to light switch and fan timer from appliances. Use a wire nut for fan timer.
Line Wire - Currently, long and daisy chained between both switches. I will cut shorter, pigtail with two black spare 4inch wires with 12awg, and connect to light switch and fan timer will need a wire nut.
Neutral - only the fan timer has a neutral. Pull out the neutral from back of box, untwist wire nut and loosen the white cables a little. Fit the neutral inside and add twist back wire nut.
One thing I’ve noticed is I am putting on a lot of new wire nuts. I’m hoping there is enough space. I can get wagos, but I frankly don’t want to spend the extra money for a small project like this if I don’t have to.
